A gas reservoir produced 1 MMscf gas and 13 MSTB water. The current and initial gas formation value factors...reservoir modeling predicts two equally possible scenarios for water influx...The initial gas in place (MMscf) is most likely closest to: A) 27.1 B) 30.1 C) 33.1 D) There is likely not any water influx.
This problem is fairly simple; just watch the units. It try to crank these out quickly and let the chips fall where they may, so it wouldn't surprise me if I had an error floating around on this one. Just remember on gas reservoir problems, 90% of the errors are units, and the last 10% are just misreading the problem.
Anyway, I'm posting #19 to address any questions, or even to take suggestions on how it could be modified to better prepare one for gas reservoir problems.
No comments:
Post a Comment